wall plug
英 [ˈwɔːl plʌɡ]
美 [ˈwɔːl plʌɡ]
墙上插座
英英释义
noun
- receptacle providing a place in a wiring system where current can be taken to run electrical devices
双语例句
- It is described in this paper how to get an adequate geometry of the piercing plug, including the taper length, nose thickness and the plug wall thickness, when conducting design of the said plug.
前言：介绍了在顶头设计中，如何正确选择穿孔锥长、鼻端厚及顶头壁厚的几何尺寸。 - Once the resulting burr generated components will run into sharp components and holes in the wall or between the bottom of defects, will plug the workpiece.
由此生成的毛刺一旦碰到锋利的部件就会在部件和孔的侧壁或底部之间产生缺陷，会堵塞工件。 - Improvement of non-uniform longitudinal wall thickness in tube-rolling on a φ 140mm plug mill
减小φ140mm自动轧管机组轧管的纵向壁厚不均 - A larger diameter with a relative thinner wall for an open-ended pile leads to a higher plug length.
分析认为开口管桩直径越大管壁越薄，形成的土塞高度则越大。 - Analysis on Tube Wall Thickness Accuracy Improvement Resulting from Modified Second-Piercing Mill of Φ 400mm Plug Pipe Plant
Φ400mm机组二次穿孔机改造后钢管壁厚精度分析 - Wall shear stress method integrates the plug flow displacing, the low speed displacing and the turbulent flow displacing methods in theory.
壁面剪应力设计方法，从理论上把塞流顶替、低速顶替及紊流顶替技术统一起来。 - Linear deformation zone of generating wall can be obtained by means of non-linear cone angle plug combined with the barrel-shaped rolls, so the wall accuracy can be increased greatly.
采用带有非线性顶头锥角的顶头与桶形辊相配合可以获得线性的成壁变形区，从而大大提高壁厚精度。 - Water plug was introduced and TTAB on the capillary inner wall could be dissolved into the water plug, which enhanced negative zeta potential of the capillary section.
再以高差法引入水塞，吸附于毛细管壁的TTAB溶解到水中，使该段毛细管的zeta电势变负； - Have to have their own independent wall plug.
必须要有自己独立的墙上插座。 - The experiment shows the wall shear stress and the Sherwood number follows an analogous law. Their minimum appears at the nose of gas plug, while their maximum appears at the bottom of gas plug.
实验结果说明，壁面剪应力与Sherwood数的变化规律类似，在弹状泡顶部达到最小。